WEBVTT

00:00.230 --> 00:02.820
- [Narrator] Post Attack
Reconnaissance, or PAR teams,

00:02.820 --> 00:05.220
are the first surveyors after an attack.

00:05.220 --> 00:07.090
The duties of the PAR team, however,

00:07.090 --> 00:09.080
start before attacks begin.

00:09.080 --> 00:12.530
Prior to any attacks, the PAR
team must set up stanchions

00:12.530 --> 00:15.060
with M8 Chemical Agent Detector Paper.

00:15.060 --> 00:16.540
Ensure the stanchions are set up

00:16.540 --> 00:18.340
away from buildings and trees.

00:18.340 --> 00:20.970
Date and time the paper with pencil only.

00:20.970 --> 00:23.840
Once stanchions are established,
PAR teams take cover

00:23.840 --> 00:26.090
until released by the unit control center.

00:26.090 --> 00:28.780
Once released, PAR teams
will use the rod established

00:28.780 --> 00:30.240
by their unit control center

00:30.240 --> 00:33.370
and conduct a thorough
examination of their area.

00:33.370 --> 00:37.620
Any unexploded ordnance, or
UXOs, casualties, damages,

00:37.620 --> 00:40.030
or contaminations must
be immediately reported

00:40.030 --> 00:41.990
to the unit control center.

00:41.990 --> 00:43.750
If a UXO is discovered,

00:43.750 --> 00:47.260
do not transmit by handheld
radio within 25 feet,

00:47.260 --> 00:50.390
or by vehicle-mounted
radio within 100 feet.

00:50.390 --> 00:52.250
Provide as much information as possible

00:52.250 --> 00:55.220
to properly identify the UXO.

00:55.220 --> 00:57.980
If an M8 stanchion is
within the UXO cordon,

00:57.980 --> 01:01.650
do not check these posts
and instead notify the UCC.

01:01.650 --> 01:05.360
Set the initial UXO marker
down and continue the sweep.

01:05.360 --> 01:06.790
Once the sweep is completed,

01:06.790 --> 01:10.660
return and cordon the UXO as
required in the Airman's Manual

01:10.660 --> 01:12.680
The PAR team's goal is
to complete the sweep

01:12.680 --> 01:15.030
as quickly and accurately as possible.

01:15.030 --> 01:18.210
Your first sweep should
take roughly 15 minutes.

01:18.210 --> 01:20.400
After completing the initial sweep,

01:20.400 --> 01:24.050
complete a second sweep to
change out all M8 paper.

01:24.050 --> 01:26.863
Treat used paper as contaminated waste.